WHY the time and the know how to solve this is NOW

The operator’s clock is running out of time.

A
Flaring rules are closing in.
EPA is phasing out routine flaring. Operators have to capture the gas, redirect it, or shut the well in. None of those options pencil today on a marginal well. Roughly 70% of the more than 900,000 onshore US wells are marginal at 25 Mcf/day or less, and they carry about half of all production-site methane. Should previous EPA Natural Gas STAR, Marginal Conventional Wells.
B
Distributed power is bankable now.
State and regional capital is financing behind-the-meter and grid-edge generation at scale. From low cost federally backed loans to remediation and capture grants, multiple new pathways have opened to accelerate well recapture or closure. 
C
Half the wellsites already have the interconnection.
Roughly half of rod-pumped and ESP wellsites in the Permian — the most electrified basin in the country — already have grid service, and where it exists it is 480/277V three-phase, exactly what the MDRG-MK6 delivers. The other half is the opportunity where wellsites with no electrical service are usually a wellsite with no way to get the gas to market. They are dead assets with real resources ready for revenue. S&P Global Commodity Insights, “Electrifying the Permian Basin,” presented to ERCOT, March 2023 — rod pump & ESP 51% currently grid-connected against a 95% target.
D
The hardware to make this a low cost venture has arrived.
Five years ago we couldn't have built this. Superalloy 3D printing and high-speed PMG technology now make a 78.7 kWe wellhead unit cost-effective at production volumes. Sure there are gensets that burn untreated gas; but their cost economics model nearly 2X as much.
STRANDED AND VENTED GAS HAS NO MARKET
A DEEP DIVE
INTO STATE REPORTS

Where the gas has
no economic market.

Several states have already made the finding for us. Kansas lets an operator vent or flare on a sworn affidavit that the gas “is uneconomic to market due to pipeline or marketing expenses.” Ohio’s statute permits flaring where “there is no economic market at the well.” Indiana’s says flaring isn’t waste “if it is not economical to market the natural gas.” North Dakota goes furthest — to get a flaring exemption there, an operator must file documentation that on-site electrical generator equipment would be economically infeasible.

Enthusiast Power exists to change that answer by offering resource owners a $0 capital investment option to turn that lost opportunity into real revenue. 


EIA Today in Energy, Dec 2024 · ODNR Form 10 · Howard Center/ASU “Gaslit,” 2022 · K.A.R. 82-3-208 · ORC 1509.20 · 312 IAC 29-3-3 · NDAC 43-02-03-60.2

The midstream arithmetic that makes gas uneconomic to market.

Gathering margin
20 Mcf/day well
~$5,400/yrAnadarko · East Daley Analytics 1Q22 G&P benchmarking
Four-inch gathering pipeline lateral~$98,000/miICF for INGAA, 2018 · 2017 dollars
Traditional payback~18 yrsOur illustration from the two inputs above — before tap, meter or compression costs are expensed

The economics of connecting a marginal well stopped working a long time ago, on a declining asset. The precedent of solutions exists at scale: Diversified Energy, FuelCell Energy and TESIAC formed a 360 MW Appalachian gas-and-coal-mine-methane data center venture in March 2025. And that was on economic flows of gas.  We can do the same in a distributed multi-unit resilient deployment. 

Where our research matches our deployments. 

Documented to data-sheet depth7 statesTX · PA · OH · MO · KS · CO · OK
North DakotaStrongest driver91% gas capture required · oil capped at 100–200 bopd for failure
New Mexico98% by 31 Dec 2026No economic exemption — flaring simply closed as an option


An MK6-NGT unit serving an industrial building behind the meter
Example single deployment — one unit supplies 75 kWe electricity and 30 kW heat
A bank of MK6-NGT units serving greenhouses
Example agricultural deployment — 225 kWe electricity and a CHP steam module for greenhouse farming


REAL REVENUE FOR RESOURCE OWNERS & MIDSTREAM OPERATORS

Turn your wells
that are a liability
into dispatchable power and revenue.

If you own marginal wells or operate a midstream system that ends at a stranded tail, the MK6-NGT turns gas you can’t economically gather into electricity and heat at the wellhead — no gathering, no offtake to market, no middlemen between resource and revenue. No flaring liability. No shut-in pressure on you. 

No capital lift on your books. Just a simple agreement and monthly checks.

01
Stop flaring. Start earning.
Gas that’s currently flared, vented, or shut in becomes a metered revenue stream. Enthusiast Power supplies the unit, installs in two to three days, and operates the asset until end day agreement.
02
No capex to deploy. Hands off to operate.
Nothing on your balance sheet and nothing on your maintenance schedule. You provide the gas; we own the unit and run it.
03
Service interval that respects your schedule.
Annual scheduled service, done at the pad. The unit never goes back to the OEM and never ties up your crew or your lease road.
04
Compliant with where rules are heading.
Capture-and-convert is the durable answer to where the flaring rules are heading, and it is what this unit was engineered to do.
Two ways to deploy
Resource Owner
You own marginal wells with stranded gas. Enthusiast Power installs and operates. You receive a share of generation revenue or a fixed per-MWh payment. Zero capex. Zero effort. 
Midstream Operator
You operate gathering systems with low-volume tails. Enthusiast Power takes the tail-stream gas at the system boundary and converts it. Reduces venting/flaring obligations across your footprint without modifying upstream contracts.
OWN-AND-OPERATE MODEL · POWER SHARING OR PER-MWh

PER-WELL ECONOMICS where YOUR LIABILITY BECOMES AN ASSET AGAIN
ENERGY-AS-A-SERVICE
FROM ENTHUSIAST POWER
UNIT ECONOMICS

Subsidy-free per-unit
economics.



One unit at 17 Mcf/day · 75 kWe · 85% capacity factor, against posted utility avoided-cost tariffs. Seven-state data sheets v1.8. Rates vary by utility and territory.
Resource owner capital None We fund, install, own and operate the unit
Resource owner operating cost None No crew, no maintenance, no fuel handling
Owner contributes Site & gas rights Gas that currently earns nothing, or is flared
Owner revenue share $4,000–12,300/yr Per unit · 37.5% of gross at posted avoided-cost rates · PA $10,624 · OH $9,598 · TX $7,958 · OK $6,073 (to $12,272 at PSO firm) · KS $5,837 · CO $5,353

Enthusiast Power deploys, owns and operates the unit, while the resource owner supplies the well site and the gas rights. No capital outlay, no operating cost, no service commitment. Revenue splits in our favor until the capital on that unit is earned back, then shifts to the operator’s benefit for the life of the asset. No tax credit, no subsidy — just the gas that is already there. One well at 75 Mcf/day supports roughly four units, about 300 kWe on a single pad and $12K-$49K revenue.

Detailed pro forma, sensitivity tables, and per-state revenue breakdowns available on request.

PER-UNIT · NOMINAL
DETAILED PRO FORMA · ON REQUEST
phased rollout deployment
Proof of concept FLEET · 2027
a 5-unit test deployment
ROLLOUT

From prototype to field units we're ready to work for you.

The prototype is built in Liberty, Missouri. The five-site POC fleet follows in 2027 for both field research and revenue to our partner. A 200 well follow on deployment is currently in design. Will yours be next?

PH 01
Liberty, MO
HQ · Prototype
PH 02
5-well deployment
5-Site POC · 2027
PH 03
200-well gas field
Expansion
PH 04
Your Site, Your Money
Full Revenue Generation
COKSMO OKTXPAOH NDNM SEVEN STATES DOCUMENTED TO DATA-SHEET DEPTH ND · NM — STRONGEST CAPTURE REQUIREMENTS SCHEMATIC · NOT TO SCALE · THE FLEET FOLLOWS THE OPERATOR

PROTOTYPE 2026 · POC FLEET 2027


TEAM & PARTNERS Working together for a bigger purpose

Our operations bench
is built for excellence.

Enthusiast Power is built lean on purpose — a small principal team, a vendor network, and a bench of advisors, each bringing their unique enthusiasm to our vision.

For the full team across all three companies, see enthusiastcompanies.com.

Leadership & Advisors
Founder / Inventor / CEO
Brian Peck
Two decades of cross-industry operational leadership · Inventor of the MDRG technology platform across six design generations. Full bio at enthusiastcompanies.com
Vice President · Grants, Regulation & Subsurface
Nathan Rohrbaugh, RG
PhD candidate, Applied Geology, Kent State · MS Geological Engineering, Missouri S&T · U.S. Army Corps veteran, Purple Heart recipient
Development Partner · Wells & Regulatory
Dan Arthur, P.E.
ALL Consulting · Tulsa OK · P.E. in 36 states · U.S. DOE Federal Advisory Committee · Identified the 200 proof-of-concept wells
Advisor · State Geology & Regulatory
Jerry Prewett, RG
Deputy Director & Assistant State Geologist, Missouri DNR · Thirty years in state geological survey · President, Association of Missouri Geologists
Advisor · Subsurface & Resource Geology
Aaron Mattison
Mafic Consulting · MBA, University of Colorado Boulder · Formerly BP · Reelfoot Rift structural geology
Facilities & Deployment Operations
Paul Miller
Former Turner Construction · Multi-state licensed general contractor · Data-center relationships opening the behind-the-meter channel
Manufacturing & Parts Operations
Bob Peck
DSM / DSR · Director of Parts Operations · Thirty-year machinist · Owns the path from prototype components to production volume
Strategic Partners · Manufacturing & Validation
EOS / Additive Minds
Technology & Manufacturing Partner
IN718 DMLS · Time-and-material study complete · Full TtM path for the rotor
Rand Simulation / Ansys
CFD & Simulation Partner
Independent CFD baseline for MK5 and MK6 generations · Aerodynamic validation
Calnetix Magnaforce
Generator OEM
95 kW high-speed permanent magnet generator · Direct-drive class
Fastrak Energy
Cherokee Basin & Fabrication
77 wells across 15 leases in three Southeast Kansas counties · Fastrak Fabrications for builds, rebuilds and prototyping · Behind-the-meter compute offtake · Cherryvale KS · fastrakenergyllc.com
Ortech Ceramics
Hybrid Bearings
Silicon-nitride hybrid bearing supply for the MK6 rotating assembly · Sacramento CA
Asender
Distribution — NA & Europe
Established reciprocating-engine line with exclusive North American and European coverage
DSM Precision Mfg.
CNC Machining Partner
Okuma CNC capacity for housing components and validation tooling